ZMR Hobbywing F4 Flight Controller 4in1 40A 2-5S BLHeli_S DShot600 Flight Control Board for FPV Racing Quadcopter RC Frame Drone

Amazon Price: N/A (as of – Details). Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on the Amazon site at the time of purchase will apply to the purchase of this product.

Introduction:

Super-high Running Frequency The STM32F405 MCU which features the effective computing capability and super-high running frequency permits the FC to run the PID and gyro with higher frequency.

DShot 150/300/600/, Oneshot125, Oneshot42, Multishot Modes Supported Besides the most recent Dshot 150/300/600/ 1200 mode, the FC likewise supports the regular PWM mode, Oneshot125 mode, Oneshot42 mode and Multishot mode.

TF-card Insertion Supported Onboard OSD microchip enables users to quickly adjust various (OSD) specifications by means of the Betaflight/Cleanflight software.

Onboard OSD Microchip Onboard OSD microchip allows users to easily adjust various (OSD) parameters through the Betaflight/Cleanflight software application.

BetaFlight/Cleanflight Firmware Ready The FC which supports Betaflight/Cleanflight firmware & permits parameter adjustment by means of Betaflight/ Cleanflight software is more suitable to FPV flying & racing.

Compatible( with the Hobbywing 4IN1 ESC&VTX) It’s simple to wire and set up when pairing the FC with a Hobbywing 4-in-1 tower ESC & a HOBBYWING VTX (Video Transmitter).

F4 Flight Contr oller:

Size: 35x35mm

Mounting Holes: 30.5 x30.5 mm.

Firmware Version: OMNIBUSF4SD.

40A ESC:.

Cont./ Peak Current: 40Ax4/50Ax4.

Input Voltage: 2-5S Lipo.

BEC output: 5V & 1.5 A.

Firmware: BLHeli_S A-H-50 16.5.

Input Wires: Red-14AWG-130mm/ Black-14AWG-130mm.

Output Wires: No wires however solder tabs.

Support: DShot150/300/600, Oneshot125 Mode, Oneshot42 Mode.

Size: 42.6 x36x4mm.

Weight: 10g.